Recent Posts

1

ReaSnow S1 / How to make the mouse sensitivity in S1 greater than the maximum?

« Last post by Fletcher on Today at 03:38:48 PM »

Hi all.

Problem with playing Fallout 3 on Xbox 360.
If in the game itself you set the mouse sensitivity to maximum, and in the Realsnow application you set the mouse sensitivity to maximum (50), then this is still not enough for a normal game. The character turns too slowly.

I tried to connect several different mouses to S1 that have a DPI switch button. But it did not help. Xbox360 ignores clicks on this button and uses only the base DPI value, which is not enough for the game character.

Please tell me, can I somehow set the mouse sensitivity to more than 50 in the Realsnow application?

Thanks a lot.

2

ReaSnow S1 / Re: After update S1 no longer works

« Last post by Fletcher on Today at 03:32:22 PM »

Everything turned out to be quite simple.
The S1 did not work if I flashed it using an application on a PC in automatic update mode.
But if you download the file of the latest stable firmware manually, and specify it explicitly to the flasher, and make a full reset command after the firmware, then the S1 starts working again. That's what I did.

3

ReaSnow S1 / Re: Need to adjust the center point of the joystick

« Last post by sachiel on Today at 11:07:45 AM »

This issue is not limited to Aim Assist
When I move the mouse in any direction
Both will cause the x-axis of the joystick to increase by 4% and the y-axis to decrease by 4%

4

ReaSnow S1 / Re: Need to adjust the center point of the joystick

« Last post by sachiel on Today at 10:59:40 AM »

Go to Settings-Global Settings-Others, and change the value of "Original Controller Deadzone".

I tried again on PS5 and found that modifying the dead zone did not solve the problem. When I moved the mouse in any direction, the crosshairs clearly shifted downwards to the right
https://streamable.com/yxui0f

5

ReaSnow S1 / Re: SCROLL DO MOUSE PARANDO DE FUNCIONAR

« Last post by Leo_55021 on Today at 10:36:09 AM »

Por favor, ajuda ai! N?o estou conseguindo jogar! Ele fica uns 10 min e depois simplesmente para de funcionar o scrool.
At? agora estava funcionando normal em todos as atualiza??o. Eu jogo no pc, antes eu n?o precisava colocar controle para funcionar. Agora eu tenho colocar um controle e toda hora o scrool desativa. Ta desanimador jogar desse jeito. Pe?o ajuda de voc?s! A a primeira vez que dar algum tipo de problema em quest?o de atualizao. Eu jogo Warzone.
Mandei o video e alguns prints para o email: support@reasnow.com
meu email: leonardopindorama@gmail.com

6

ReaSnow S1 / Re: Need to adjust the center point of the joystick

« Last post by Austin on Today at 10:05:53 AM »

Go to Settings-Global Settings-Others, and change the value of "Original Controller Deadzone".

7

ReaSnow S1 / Re: Reasnow S1 not working together with Beloader pro

« Last post by Austin on Today at 09:58:41 AM »

We did a test. Plug the DS controller into Beloader Pro's USB port, and set it up. The controller works properly. If replace DS controller with S1, S1 works properly, too.
S1 FW version: 5.6.152 Beloader Pro FW version: 0000202303031745

8

ReaSnow S1 / Re: Reasnow S1 not working together with Beloader pro

« Last post by vladislav on May 07, 2024, 09:38:47 PM »

Please try the following steps
http://www.reasnow.com/forum/index.php?topic=3995.0

I saw this post, and tried this step's before writing post. All this steps in my video. Nothing helps. I can record video again step by step.

9

ReaSnow S1 / Need to adjust the center point of the joystick

« Last post by sachiel on May 07, 2024, 07:30:26 PM »

When I use dualsense5 on my pc , i test Aim Assist discovering that the crosshairs are constantly moving downwards
Afterwards, it was discovered that the joystick was -1% off center : https://postimg.cc/gallery/zLY04hy
How should I fix it？

10

ReaSnow S1 / Re: need config sea of thieves

« Last post by Austin on May 07, 2024, 09:34:22 AM »

The config has been added.