ReaSnow Forum
Products => ReaSnow S1 => Topic started by: Barras on June 07, 2020, 10:02:22 PM
-
I need help. I can't optimize the settings for making diagonal movements. The movements are not fluid and it makes small jumps, especially if the movement is slow. I only play Warface on PS4. My mouse is Benq Zowie EC2-A. 3200 DPi, USB rate 1000hz. My mousepad is Benq Zowie P-SR. The sensitivity and ADS sensitivity of the game is at maximum. Please can you advise me to configure it? Thank you PS: Sorry if you don't understand me, but I don't speak English and I use the Goolge translator
-
We will also need the following details to help you:
1. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
2. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
3. ReaSnow S1 firmware and APP version
-
I actually have a question with warface. Does the warface profile work with warface breakout or do you need to make a separate profile for it? Thinking about purchasing Warface Breakout that’s why I ask.
-
please just try warface's config,
if the changes are big, will add a new preset for it:)
-
We will also need the following details to help you:
1. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
2. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
3. ReaSnow S1 firmware and APP version
Thanks for such a quick response.
I have been modifying parameters, I have tried configurations without knowledge.
Now it works better, but I know that it can still be optimized more. I attach my settings.
I have lowered the DPI to 1600/1000hz polerate of the Benq Zowie EC2-A Mouse
1. My configuration on Warface for PS4 is:
- ADS Close-range = 300%
- ADS Mid-range = 300%
- ADS High-range = 300%
- Inner dead zone = 12%
- Outer dead zone = 0%
- Advance control options = Enable
- Yaw speed = 50%
- Pitch speed = 50%
- Yaw aceleration = 0%
- Pitch aceleration = 0%
- Acceleration time = 0%
- Acceleration delay = 0%
- ADS Yaw speed = 50%
- ADS Pitch speed = 50%
- ADS Yaw aceleration = 0%
- ADS Pitch aceleration = 0%
- ADS Acceleration time = 0%
- ADS Acceleration delay = 0%
2. My configuration in APP (I don't understand anything about parameters like Min Speed, Smoothness, Curve, etc ...
They are things that I do not understand what they are for, and I have been trying)
- Game config: Warface = 12 Deadzone (Default 16)
- HIP: Sensibility = 5, XY Ratio = 1, Min Speed = 1, Smoothness = 3, Curve = Defalult
- ADS: Sensibility = 3, XY Ratio = 1, Min Speed = 1, Smoothness = 3, Curve = Defalult
3.
- Firmware version = V5.3.63
- ReaSnow Manager APP = V1.2.42 for Android
I would appreciate it if you could help me find an optimal configuration. Thank you
-
Excuse me, I have my mouse set to 800DPI / 1000hz
-
1. for the game, try restore it to default, and disable the Advance control options
2. then please try set your mouse to 3200DPI or above /500HZ,
and lower HIP/ADS sensitivities a bit in our APP.
feedback is welcomed:)