Not working what to do ?

[Winsy88]

Hi
I received my reasnow s1 and d1 today.
I have updated s1 to New Firmware Version 5.6.150 and downloaded android app ( app version 1.6.19
when i put it to my ps5 and want to start app it says "Booting please open this app later"
I have tried to remove update on s1 and upgrade again.
s1 flashes blue red green
what should I do ?

[Austin]

On this page: http://www.reasnow.com/forum/index.php?topic=4153.0
"3. set Boot Mode = PS5(D1) in ReaSnow S1 Firmware Tool 4. Enable "Use USB cable" in communication method on PS5"
Did you do that?

[Winsy88]

I have set it to use cable in the settings on the ps5
it still won't open app
i have also tried putting s1 to pc and tried to open app with no success

[Winsy88]

now I've got the app up and running.
but I can't see my controller in the picture in the app?
should I choose "authentication controller " or "convented controller"
I use ps5 controller set in D1

sorry for all my questions but i don't get it..

[Austin]

authentication controller is ok, cause you are using the PS5 controller on D1

[Winsy88]

I have chosen that and set the controller in d1 but I still can't see the controller in the app?
it shows the picture with the s1 and above the ps5, but on the left there is no controller.
Did I forget to do something?

[Winsy88]

I use the original ps5 controller cable.
if I plug the controller cable into the s1, my controller appears in the app "below"

[Austin]

Just use the controller on D1 as normal. It won't appear in the app interface.