ReaSnow Forum

Products => ReaSnow S1 => Topic started by: HammerViKiNG on April 25, 2021, 10:55:30 PM

Title: Using Reasnow S1 with KVM-switch
Post by: HammerViKiNG on April 25, 2021, 10:55:30 PM

Hello everyone! I have a question before purchase. Currently I have the following configuraton: keyboard and mouse are connected to 2-outputs KVM-switch. One of the outputs is connected to PC and another is connected directly to PS5. Is it possible to use Rasnow S1 with the second output of KVM-switch as the only input (besides power input and controller, of course)?

Title: Re: Using Reasnow S1 with KVM-switch
Post by: richard on April 26, 2021, 08:07:42 AM

if the output of your KVM is standard keyboard and mouse,
I think it will work.

BTW, for our converter, it's recommended to use a 5000DPI(or above) mouse(the MIN is 4000DPI).
if your KVM lowers the DPI, it will lower the performance of our converter.

Title: Re: Using Reasnow S1 with KVM-switch
Post by: Kazin1111 on May 15, 2021, 06:45:31 AM

Yes. I use 2 fightsticks simutaniously through a hub into a kcm switch.  One end goes to a reasnow, the other I use to update the two fightsticks.

Title: Re: Using Reasnow S1 with KVM-switch
Post by: richard on May 16, 2021, 12:37:28 AM

in fact, you can plug 2 flight sticks into ReaSnow S1 directly, USB2, and USB3 ports.