ReaSnow Forum
Products => ReaSnow S1 => Topic started by: b3sky on December 02, 2022, 02:16:33 PM
-
hi
ps5 + hori mini pad + reasnow s1 + gimx g27 convert direct drive racing wheel
I am using it like this.
The racing wheel converted to g27 using gimx works well on pc.
However, when connecting to reasnow s1, it is not recognized, so I cannot bind the key.
gimx site ( https://blog.gimx.fr/ )
This is the hardware id of the converted g27.
USB\VID_046D&PID_C29B&REV_1238
USB\VID_046D&PID_C29B
-
g27 can be plugged into S1 directly.
as shown in this document:
http://www.reasnow.com/download/ReaSnowApp/Steering%20Wheel.pdf
-
I don't have a real G27.
Using gimx, the simagic alpha mini wheel is converted to be recognized as G27 and is being used.
It is converted to g27 on the pc, but it is not recognized in reasnow s1, so I asked a question.
-
it only means the output from gimx is not the same as a real g27, or it will have no problem being recognized by s1.
but we have no gimx for testing here.