ReaSnow Forum
Products => ReaSnow S1 => Topic started by: richard on October 26, 2019, 08:57:21 PM
-
we just released a preset for Call Of Duty: Modern Warfare(2019)/PS4.8)
here are some recommendations:)
1. game settings:
Options/Controller:
Horizontal Stick Sensitivity = 20
Vertical Stick Sensitivity =20
ADS Sensitivity Multiplier(low zoom)=2.00
ADS Sensitivity Multiplier(high zoon)=2.00
Aim Response Curve Type = Standard
Aim Down Sight Behavior = Hold
2. mouse settings:
5000DPI/500HZ
3. Settings in ReaSnow S1
default preset for "Call Of Duty: Modern Warfare(2019)"
any feedback is welcomed!
the preset for Xbox One will be provided in a couple of days!
-
good night Richard. could you pass a current configuration to us?
-
our ReaSnow Manager APP will fetch the latest game profile from our server automatically every time it's restarted.
-
thank you Richar 8)
-
Hello, i am having an issue with Modern Warfare. When i play the Multiplayer, i feel like there’s some input delay and i'm overturning sometimes because of this. There’s no input delay when i play warzone. Only on MW multiplayer. The last problem i'm having is on Warzone. My sensitivity becomes very slow, only when I’m using the parachute. I'm using Flash tool V5.4.7 and Manager app V1.3.6. Thank you.
-
A. the delay issue in MW
We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version
6. did you feel the delay in campaign mode?
B. create a "parachute" scenario and set the sensitivity in it to 20~50, and activate this scenario when parachuting.
-
1. PS4, COD Modern warfare game.
2. Mouse 5200 dpi, issue is on both 500 and 1000 report rate, Logitech G502 Hero high performance.
3. Settings are all the ones recommended from the reasnow app.
4. im using the cod mw (2019) config. Hip: 3.95 ADS: 4.95. i dont see where to find out hip yx ratio and the others? could this info only been seen with the reasnow crosshair and not s1?
5. reasnow s1 firmware 5.4.7 app version 1.3.6
6. I haven't tried it on campaign but i know the delay was there in multiplayer but not warzone.
How do i create a scenario with the reasnow s1?
-
please enable "Professional Mode" in "Settings" in our APP,
so you can have all features enabled for you.
then, you can edit the MW config and change TBD1~3 to "parachute",
and customize the sensitivities in it as you need.
and please try campaign mode, any feedback is welcomed.
-
i Tried creating parachute scenarios with TBD 1 thru 3 and they would only activate when i wasn’t parachuting.
-
try set a key as hotkey for this scenario, and choose hold mode for it.
when parachuting, you can hold this hotkey to get the faster turning you need.
and you can just release this hotkey to get back to your normal sensitivity when you are on foot.
-
Unfortunately it didn’t work when i set a key for the hotkey. Didn't work with Hold nor toggle. Also i tried it with the warzone config and it didn't work there either. The only times the key set as hotkey for TBD1 thru 3 worked with hold or toggle, was when i wasn't parachuting.
-
can you export or copy your game profile and send it(rsc file) to us?
support@reasnow.com
-
Okay I exported the game file and sent it with my yahoo email. Subject is "Cod MW configuration." I sent it to the support.reasnow.com email.
-
Also i noticed what is making me overturn sometimes is that there is something like an acceleration only when i come out of aiming down sight and turn at the same time.
-
yes, got your email, will reply later.
-
Thank you.
-
@Nightcity
1.we tried your config, it works with no issue here.
just press and hold left_alt key,
sensitivity will be increased a lots.
so just press and hold left_alt key while parachuting,
the turning speed will be improved a lots.
2. and we find no turning speed acceleration when releasing mouse right button.
if you still have problem with that, can you provide more details to help us reproducing it?
-
Okay thank you i appreciate your help. I think the overturning might just be me being a beginner with the mouse.
Now I do notice my parachute sensitivity increased with the scenario but the trick is to slowly move my mouse in order to get it to work.
The increased sensitivity with the scenario option is good, it increases the parachute sensitivity from about 5% of my regular sensitivity to about half the speed of my regular sensitivity but is there a way to increase the sensitivity more without having to set a higher dpi?
-
try moving your mouse a bit slower when the parachuting scenario is activated.
-
It works fine. I was only curious to know if there was a way to increase the sensitivity past 50 without setting a higher dpi. Thank you for all your help.
-
50 is already the MAX sensitivity in ReaSnow S1,
but you can try changing your mouse curve to get better turning while parachuting.
please read "Optimizing Mouse Control" for more details:
http://www.reasnow.com/forum/index.php?topic=2612.0
-
That was the answer I was looking for thank you. Do you have an email I can reach you at?
-
please send your email to: support@reasnow.com
but it's recommended to use our forum,
for all posts might be some help for others with similar issues.
-
That makes sense. Okay the problem I’m having is the one i mentioned before but i figured out its not an acceleration that was making me overturn, its a sensitivity jump. I for sure get the sensitivity jump when I turn about 180 degrees during the transition from aiming down sights mode to hip mode. If i dont want to get a sensitivity jump, i have to wait until the transition from ads mode to hip mode is done and then i can turn 180 degrees without a sensitivity jump. This jump happens in Campaign, Multiplayer and Warzone.
-
please try reducing "delay" in ADS scenario,
might be some help for you.
-
I put the delay to 0 and it feels good now. I'm going to try it out more. What does raising and lowering the delay do exactly?
-
in some games, while pressing the mouse right button to enter ADS mode,
the game will take a short time to change its sensitivity. e.g. 100ms~400ms.
but when a mouse right button is pressed, ReaSnow S1 will enable its sensitivity in ADS scenario immediately,
if this delay in ADS scenario is set to 0.
to address the delayed sensitivity changes in game, we add a "delay" here in our APP.
-
Does the delay setting in reasnow s1 apply for when you engage and disengage the ads scenario? Or only for when you engage?
-
this delay value is only effective during the transition from HIP to ADS
-
when i transition from hip to ads, its fine. The problem is when i transition from ads to hip, theres a sensitivity jump. I thought setting the delay in ads scenario to 0 fixed this but it didn't.
I've read that call of duty modern warfare is the first call of duty to add a deceleration when transitioning from ads to hip. Is there a setting I can change to help with this?
-
can you provide more details on this?
will assess the possibility to improve it.
-
Okay thank you. I sent you an email at support@reasnow.com with more details on this.
-
got it, will reply later!