ReaSnow Forum

Products => ReaSnow S1 => Topic started by: mhancer on September 18, 2023, 07:38:16 AM

Title: Reasnow s1 connection fail
Post by: mhancer on September 18, 2023, 07:38:16 AM

Hello,
during the game, the S1 beeps like in the video.  All cables have been renewed.  All steps in the forum have been done.  But the problem was not fixed.

https://youtube.com/shorts/PMtWvJ-lDyU?si=wOaP1jM_A2vIqUnW

Title: Re: Reasnow s1 connection fail
Post by: Austin on September 18, 2023, 09:55:30 AM

Are u using M&K with RGB lights? If you are using that M&K, try to turn off the lights.
Also, you might change the USB port on the console.

Title: Re: Reasnow s1 connection fail
Post by: mhancer on September 18, 2023, 03:57:21 PM

Yes, it has K/M RGB feature. I will close it and try again.

Title: Re: Reasnow s1 connection fail
Post by: mhancer on September 19, 2023, 05:05:28 AM

Hello, my problem is not solved.  I tried M/K non rgb.  The same problem occurs again.

Title: Re: Reasnow s1 connection fail
Post by: mhancer on September 19, 2023, 05:17:39 AM

https://youtube.com/shorts/4nd_-heioao?si=Eh3Bi7nPuTx13Ej8

Title: Re: Reasnow s1 connection fail
Post by: Austin on September 19, 2023, 09:52:11 AM

If you don't connect the M&K to S1, will things get better?

Title: Re: Reasnow s1 connection fail
Post by: mhancer on September 19, 2023, 08:02:48 PM

I tested it in an offline game. No problems with just gamepad without k/m. How do I solve this problem? I would be very happy if you guide me.

Title: Re: Reasnow s1 connection fail
Post by: Austin on September 20, 2023, 10:11:38 AM

Just a gamepad, without M&K? Maybe your M&K caused the problem. You can replace a new one or contact the manufacturer for help.