ReaSnow Forum
General Category => General-Discussion => Topic started by: Ucaio99 on April 15, 2021, 05:51:40 PM
-
Richard, how can you help me when I create a macro for the game? The sights are too heavy. How can you help me to let her loose?
-
can you elaborate on your issue with macros?
give us as many details as possible
-
so Richard when I activate the macro there I’m in an exchange I want to pull it out so that the crosshairs are heavy to pull I wanted to know if you can let it go looser?
-
do you mean that you feel the crosshair on-screen is heavy to be moved if an anti-recoil macro is activated?
ReaSnow S1 or Cross Hair?
-
yes i use reasnow s1
-
try the three dots button "..." in our anti-recoil macro editor,
just add some to the parameters for the direction when you feel hard to move in that direction.
-
hey Richard which profile do you recommend me to create to play rainbow six siege in classic or updated?
-
updated one,
and please also change your in-game settings as recommended in our APP.
-
Richard I emailed you there if you have a look there!
-
sorry, which is your email address that is used to send the emails?
-
Richard, how can you help me, my aim has a time when she skips pixels, what can I do to improve?
-
We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model, and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
it's better to restore all settings in game and change the settings as shown in our APP, and try it again with a default game config.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version
6. a detailed problem statement on using your mouse
-
Richard what I can do for the r1 seas is more accurate and at the same time more agile in the game I play a lot of rainbow six
-
1. in-game settings
Options/Controls:
Vertical Sensitivity = 100
Horizontal Sensitivity = 100
Left Stick Deadzone = 10
Right Stick Deadzone = 10
Controller Rotation = Updated
Controller ADS Sensitivity = Standard
Standard ADS Sensitivity = 50
2. mouse
5000DPI/500HZ
3. ReaSnow S1
default config for R6(RainBow Six: Siege(Updated))
-
Richard talks how can I use xim and reasnow s1 together? because I found the sensi better in xim than in reasnow I wanted to know if you have how I use the sensi do xim and macros from reasnow s1 together
-
please show us the difference between these 2 converters,
we think S1 can do the same if you can provide full details of yours,
a video will be better.
-
it is because it is eating pixel the reasnow I have done everything I put it the way you sent me there anyway eat pixel
-
I wanted to know how to configure the reasnow entirely but I don't know how to configure it because it's in English I wanted to know from basic to advanced
-
We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model, and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
it's better to restore all settings in game and change the settings as shown in our APP, and try it again with a default game config.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version
-
how to use both the way I said?
-
1.xbox one
2.5300 dpi 500 Hz, mouse Logitech g502
3.100 / 100/10/10
1,0x = 58
1,5x = 98
2,0x = 100
2,5x = 102
3,0x = 103
4,0x = 104
5,0x = 105
12,0x = 161
4.rainbow six siege (atualizado)
5.tou na última atualização do reasnow s1
-
1. in-game settings
(firstly, you should restore all settings to defaults, and then change the followings as recommended)
Options/Controls:
Vertical Sensitivity = 100
Horizontal Sensitivity = 100
Left Stick Deadzone = 10
Right Stick Deadzone = 10
Controller Rotation = Updated
Controller ADS Sensitivity = Standard
Standard ADS Sensitivity = 50
2. mouse
5000DPI/500HZ
3. ReaSnow S1
default config for Rainbow 6(updated)
if you still have trouble with the mouse,
please provide a video to show us your trouble.
or tell us how to reproduce the issue here,
game mode, which gun you are using, the scope, etc.
will gladly check all for you.
-
so Richard just clears me of this doubt there is no way to use the xim sensi together with the macros from reasnow s1 no
-
how can you teach me how to configure reasnow s1 in what I can change what I can't?
-
you can change all settings in our APP.
and for your instance, please try the "smoothness" or "MIN speed",
they might be some help.
-
so Richard has two deadzone parts I can change them if I change them because there’s one that is 16 and another one is 10?
-
3. Original Controller Dead Zone
Original Controller Deadzone is used to block abnormal input from worn sticks of the original controller.
"Original Controller" is the authentication controller which is connected to USB1 of ReaSnow S1.
Controller deadzone is the amount your stick can move before it’s recognized in game,
the bigger the deadzone the more the stick can move before it registers an input.
A low deadzone is more responsive, a subtle touch will result in an input, there’s a flip side,
if your controller is a little worn or the sticks are a little loose it could lead to drift.
Larger deadzones trade off responsiveness to avoid accidental inputs.
And the following material might also be some help for you:
https://thegamingsetup.com/guides/what-is-controller-deadzone
As for the "Third-party Controller", it is the controller which is connected to USB2 or USB3 of ReaSnow S1,
or those are connected to ReaSnow S1 wirelessly.
-
I can change the dead zone, something changes?
-
yes, you can change the dead zone for the original controller or third-party controller in our APP.
changing dead zone will only bring changes to sticks on controllers.