Recent Posts

1

ReaSnow S1 / Re: SCROLL DO MOUSE PARANDO DE FUNCIONAR

« Last post by Leo_55021 on Today at 10:36:09 AM »

Por favor, ajuda ai! N?o estou conseguindo jogar! Ele fica uns 10 min e depois simplesmente para de funcionar o scrool.
At? agora estava funcionando normal em todos as atualiza??o. Eu jogo no pc, antes eu n?o precisava colocar controle para funcionar. Agora eu tenho colocar um controle e toda hora o scrool desativa. Ta desanimador jogar desse jeito. Pe?o ajuda de voc?s! A a primeira vez que dar algum tipo de problema em quest?o de atualizao. Eu jogo Warzone.
Mandei o video e alguns prints para o email: support@reasnow.com
meu email: leonardopindorama@gmail.com

2

ReaSnow S1 / Re: Need to adjust the center point of the joystick

« Last post by Austin on Today at 10:05:53 AM »

Go to Settings-Global Settings-Others, and change the value of "Original Controller Deadzone".

3

ReaSnow S1 / Re: Reasnow S1 not working together with Beloader pro

« Last post by Austin on Today at 09:58:41 AM »

We did a test. Plug the DS controller into Beloader Pro's USB port, and set it up. The controller works properly. If replace DS controller with S1, S1 works properly, too.
S1 FW version: 5.6.152 Beloader Pro FW version: 0000202303031745

4

ReaSnow S1 / Re: Reasnow S1 not working together with Beloader pro

« Last post by vladislav on May 07, 2024, 09:38:47 PM »

Please try the following steps
http://www.reasnow.com/forum/index.php?topic=3995.0

I saw this post, and tried this step's before writing post. All this steps in my video. Nothing helps. I can record video again step by step.

5

ReaSnow S1 / Need to adjust the center point of the joystick

« Last post by sachiel on May 07, 2024, 07:30:26 PM »

When I use dualsense5 on my pc , i test Aim Assist discovering that the crosshairs are constantly moving downwards
Afterwards, it was discovered that the joystick was -1% off center : https://postimg.cc/gallery/zLY04hy
How should I fix it？

6

ReaSnow S1 / Re: need config sea of thieves

« Last post by Austin on May 07, 2024, 09:34:22 AM »

The config has been added.

7

ReaSnow S1 / Re: Does PlayStation Move work as an authentication controller?

« Last post by Austin on May 07, 2024, 09:31:39 AM »

The PlayStation Move controller can't be an authentication controller.

8

ReaSnow S1 / Re: Reasnow S1 not working together with Beloader pro

« Last post by Hiroyuki on May 07, 2024, 09:29:16 AM »

Please try the following steps
http://www.reasnow.com/forum/index.php?topic=3995.0

1.Connect BeroderPro to the LAN cable and USB power supply (upper left). The USB can be connected to the back port of the PS5 or directly powered from a smartphone charger, for example.
2.Press the bottom left button on BeroderPro to confirm remote connection (BeroderPro LED lights up green).
3.With this state, connect Reasnow to BeroderPro (it is essential to connect the genuine controller of the PS5 to Reasnow).
4.If the connection fails, the LED on Reasnow will blink green and red, and the connection on BeroderPro will also be cut off. In this case, unplug the cable and start over from step 2.
5.Check that both Reasnow and BeroderPro are connected and their LEDs are lit green.
6.Finally, connect the headset to BeroderPro.
7.Connect the BeroderPro audio USB (upper right) to the front port of the PS5. If a loud announcement in Chinese is played when connected, the connection is successful.

However, if steps 6 and 7 are done in the wrong order, the volume may be too low or there may be severe noise on the microphone. Also, steps 2 and 3 may need to be repeated several times, but once the connection is successful, it will be stable.

9

ReaSnow S1 / Re: Xim matrix with s1

« Last post by Austin on May 07, 2024, 09:28:12 AM »

Maybe you can plug ReaSnow S1 as a 3rd party controller into xim matrix. But we don't know how to set up xim matrix, you can search on Google.

10

ReaSnow S1 / Re: After update S1 no longer works

« Last post by vladislav on May 06, 2024, 03:23:57 PM »

I was wondering, how did you solve the problem?