ReaSnow Forum
General Category => General-Discussion => Topic started by: Kirka24128 on April 22, 2019, 03:29:20 PM
-
Hello, tell me please, is it possible to connect cronusmax plus to crosshair Reasnow. I know that xim apex can be, but can it be done with crosshair? Thank you in advance!
-
currently, cross hair can accept cronusmax's signals(scripts or not).
but cronusmax will not accept cross hair's output.
so it depends on how you are going to use them.
-
For a macro that is filled in cronusmax plus. And does it make sense to use cronusmax? Thanks for the quick response.
-
yes, if cronusmax is connected to USB PORT 2/3 on cross hair,
its macro can be recognized by cross hair.
-
That is, directly to the crosshair? Without a hub? And how then to connect the keyboard or mouse?
-
USB hub is OK, cross can recognize many hubs.
-
I apologize, I did not quite understand how to connect it to the 2/3 port. and the mouse or Klava then where? And what combinations should be carried over cronusmax in order for the crosshair to see it? Just cronusmax refuses to perceive the crosshair.
-
please read page 5 in our user manual, which can be found here:
http://www.reasnow.com/forum/index.php?topic=28.0
connect your USB hub to port 2/3,
then connect your kb/ms to this hub,
and cronusmax to the remaining port on cross hair.
-
cronusmax refuses to work, did everything as you said
-
try sending a single R2 from cronusmax to cross hair,
and let us know the result.
any more support in need, please provide some more details, such as wiring, settings, etc.
a video or some screenshots will be better.
-
Сейчас заметил что hub не выводит почему клавиатуру, поменял два hub, и все равно не выводит, а на прямую может.
-
Now I noticed that the hub does not display why the keyboard, changed two hubs, and still does not display, but it can direct. (Sorry for the above)
-
Is it possible to insert the mouse and cronus in the hub, and the keyboard separately?
-
https://youtu.be/8R8YPOv9NB8
-
thanks for the details!
your question has been forwarded to our R&D team,
will reply later.