ReaSnow Forum

Products => ReaSnow Cross Hair => Topic started by: sharky on December 16, 2016, 10:54:18 AM

Title: Not working and only white LED when connected to console(XBOX One S).
Post by: sharky on December 16, 2016, 10:54:18 AM

I bought crosshair to use Logitech wheels GT on Xbox One S.
But it's not working in any kind of combinations(wheel , mouse and keyboard).
But I can only see stable white LED(not breathing) when connected to XB1 S.
It seems same as PC mode.

I checked the followings and they were worked well:
 - Work in PC mode : setting, save, firmware download, factory recovery..
 - Work in Repair mode : green LED, firmware download.
 - Stable Red LED when controller is not the official one or connection is unstable.
 - RGB cycle when connected with Xbox One S power-off.

What can I do more ?
Please give me some advice, thanks.

Title: Re: Not working and only white LED when connected to console(XBOX One S).
Post by: richard on December 16, 2016, 11:09:07 AM

1. make sure you are using the latest version V1.43.24, which can be downloaded from here:
http://www.reasnow.com/forum/index.php?topic=25.0

2. a stable white LOGO means Cross Hair do not find the controller,
   please replace the controller's USB cable with a qualified new one

3. please check the connection between your controller and Cross Hair carefully,
    specially the USB connectors, they should be firmly attached.

Title: Re: Not working and only white LED when connected to console(XBOX One S).
Post by: sharky on December 17, 2016, 10:22:19 AM

I followed your advice and replaced the controller's USB cables three times.

I found that the contact between console's controller and USB connector had a problem depending on cable position.

Now I can see breathing LOGO.

Thanks for your quick feedback,  Richard.