ReaSnow Forum

Products => ReaSnow S1 => Topic started by: Natrix5369 on September 28, 2022, 10:44:49 AM

Title: Api access
Post by: Natrix5369 on September 28, 2022, 10:44:49 AM
Hi!

Please consider adding an api interface for s1.

At a minimum, we need the ability to switch profiles and activate macros.

Also please consider adding keyboard button switching and mouse movement to this interface. I can write python scripts based on AI Vision
Title: Re: Api access
Post by: beshik on September 28, 2022, 05:45:24 PM
A good idea, a lot of possibilities open up. I hope it is possible to do this
Title: Re: Api access
Post by: richard on September 28, 2022, 06:43:47 PM
currently, this request can be achieved by a kind of special USB cable,
on one end of this USB cable, it works like a USB keyboard and mouse,
on the other end, it works like a COM port, which can be plugged into a PC for programming
Title: Re: Api access
Post by: Natrix5369 on September 29, 2022, 06:26:04 PM
currently, this request can be achieved by a kind of special USB cable,
on one end of this USB cable, it works like a USB keyboard and mouse,
on the other end, it works like a COM port, which can be plugged into a PC for programming


could you give me more information? I don't understand what we're talking about.
Title: Re: Api access
Post by: richard on September 30, 2022, 04:18:09 PM
something like this:
https://www.amazon.com/StarTech-com-Keyboard-Mouse-Switch-Transfer/dp/B00DYP6I0E?th=1

but we have not tested it yet.
a similar cable was recommended by a partner of ours previously.
Title: Re: Api access
Post by: Natrix5369 on October 01, 2022, 03:40:32 AM
something like this:
https://www.amazon.com/StarTech-com-Keyboard-Mouse-Switch-Transfer/dp/B00DYP6I0E?th=1

but we have not tested it yet.
a similar cable was recommended by a partner of ours previously.


Do I need to buy two cables?

One for the mouse and one for the keyboard?

Because reasnow s1 has a separate port for mouse and one for keyboard.
Title: Re: Api access
Post by: Natrix5369 on October 01, 2022, 03:49:18 AM
I also want to use scripts + keyboard and mouse.



Is there any option?


P.s.
If I want to write an aimbot, I need to be able to activate the scripts + use the keyboard and mouse to play.
Title: Re: Api access
Post by: richard on October 02, 2022, 08:59:21 PM
a mouse and keyboard combo can be plugged into one of the USB ports of S1 safely.

plug this USB cable into USB2,
and plug a USB HUB into USB3, then you can connect your mouse and keyboard to this USB HUB.