ReaSnow Forum

Products => ReaSnow S1 => Topic started by: Fletcher on May 02, 2024, 05:23:04 PM

Title: After update S1 no longer works
Post by: Fletcher on May 02, 2024, 05:23:04 PM

Everything worked before, but then the device sat on the shelf for a year.
Today I turned it on, started connecting from my smartphone and the program gave a message saying update.
Connected to the PC, updated - and now S1 does not work.
When power is applied, the LED blinks once in each color and then does not light up and nothing works.
I did a "reset" of device on my PC, but it still didn't help.
From the PC, the device is visible and flashed.

So what's now?
Thank you.

Title: Re: After update S1 no longer works
Post by: Austin on May 06, 2024, 09:56:59 AM

Which version of firmware are you using?

Title: Re: After update S1 no longer works
Post by: Fletcher on May 06, 2024, 02:24:45 PM

Quote from: Austin on May 06, 2024, 09:56:59 AM

Which version of firmware are you using?

Problem is solved, thank you.

Title: Re: After update S1 no longer works
Post by: vladislav on May 06, 2024, 03:23:57 PM

I was wondering, how did you solve the problem?

Title: Re: After update S1 no longer works
Post by: Fletcher on May 08, 2024, 03:32:22 PM

Quote from: vladislav on May 06, 2024, 03:23:57 PM

Everything turned out to be quite simple.
The S1 did not work if I flashed it using an application on a PC in automatic update mode.
But if you download the file of the latest stable firmware manually, and specify it explicitly to the flasher, and make a full reset command after the firmware, then the S1 starts working again. That's what I did.