ReaSnow Forum
Products => ReaSnow S1 => Topic started by: LikeABoss on March 05, 2019, 11:52:19 PM
-
So I was able to flash the crosshair and downloaded the app on my tablet go to connect and keep getting “command error 2” can’t get past this please help so I can use the app for configuration.
-
Ok I got it working after redoing it all again
-
Ok so I really like the addition of sub configs will make pubg playable with m&k. I had my Sony Nav hooked up wireless but since updating and now running through app manager I can only use it in wired. Is there a step I am missing or if running through the app because it's bluetooth I can't run the Nav wirelessly? Please let me know if this can be achieved
-
yes, we have not added the BT wireless controller support in this version,
but it will be done later:)
might be in the next release.
-
glad to know you can have it work properly,
any feedback, please just post it here with full details.
we will respond asap.
-
I have one question Richard is it possible to do on an iPhone Or is it just android?
-
The app looks amazing by the way
-
Also does it work with the older firmware crosshairs?
-
I’m sorry I meant does it work with the hardware version 1.7.4 ? 😳
-
if Hardware Ver<1.7.6, it can not be upgraded to use our APP.
-
where can i get one croshair that is compatible with the app? is there an exchange program ?
-
and yes, we will release iOS version later.
but android phones are more convenient than iphones for such a beta test.
-
So will this app be released for versions 1.7.4 or should I buy a new crosshairs?
-
V1.7.4 or similar old versions(<1.7.6) have no sufficient space to store our new firmware, sorry for that.
you will need a new one to use our app,
or the flea market might help you.
-
Richard can you please tell me how I can make sure that the new crosshair I buy is the version Hardware ?
-
I also get the "command error: 2" when starting the app :(
03-06 16:22:53.150 10297 10308 D BluetoothGatt: onConnectionUpdated() - Device=00:15:83:83:71:47 interval=38 latency=0 timeout=500 status=0
03-06 16:22:53.150 10297 10324 D libapp.so: BluetoothDevice::State(DiscoveredDetails)
03-06 16:22:53.151 10297 10324 D BluetoothGatt: setCharacteristicNotification() - uuid: 840f2b15-f273-49fe-a910-21ef907f2434 enable: true
03-06 16:22:53.154 10297 10324 D QtBluetoothGatt: Enable notifications: true
03-06 16:22:53.157 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 7 Write (false) ValueKnown: true Skipping: false Descriptor
03-06 16:22:53.244 10297 10324 D libapp.so: BluetoothDevice::State(EnabledNotification)
03-06 16:22:53.244 10297 10324 D libapp.so: BluetoothDevice::dataWrite "02000000"
03-06 16:22:53.247 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 5 Write (true) ValueKnown: true Skipping: false Characteristic
03-06 16:22:53.340 10297 10324 D libapp.so: ProtocolProxy::onDataReceived: "02000b000100010002320102230b00"
03-06 16:22:53.349 10297 10324 D libapp.so: BluetoothDevice::dataWrite "01000000"
03-06 16:22:53.353 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 5 Write (true) ValueKnown: true Skipping: false Characteristic
03-06 16:22:53.435 10297 10324 D libapp.so: ProtocolProxy::onDataReceived: "0100200001060b00040202050707010003022f0056000351373235383433000100000000"
03-06 16:22:53.437 10297 10324 D libapp.so: BluetoothDevice::dataWrite "0400010000"
03-06 16:22:53.440 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 5 Write (true) ValueKnown: true Skipping: false Characteristic
03-06 16:22:53.529 10297 10324 D libapp.so: ProtocolProxy::onDataReceived: "04020000"
03-06 16:22:53.535 10297 10324 W libapp.so: ProtocolProxy::onDataReceived State Error !!! 2
03-06 16:23:19.936 10297 10297 D InputMethodManager: prepareNavigationBarInfo() DecorView@b1e3427[ReaSnowActivity]
03-06 16:23:19.936 10297 10297 D InputMethodManager: getNavigationBarColor() -855310
03-06 16:23:19.937 10297 10297 V InputMethodManager: Starting input: tba=com.reasonw ic=null mNaviBarColor -855310 mIsGetNaviBarColorSuccess true , NavVisible : true , NavTrans : false
03-06 16:23:19.937 10297 10297 D InputMethodManager: startInputInner - Id : 0
03-06 16:23:19.937 10297 10297 I InputMethodManager: startInputInner - mService.startInputOrWindowGainedFocus
03-06 16:23:19.941 10297 10297 D InputTransport: Input channel constructed: fd=90
03-06 16:23:19.941 10297 10297 D InputTransport: Input channel destroyed: fd=72
03-06 16:23:20.338 10297 10297 D CrashReport: >>> com.reasonw.ReaSnowActivity onPaused <<<
-
your phone is?
-
your phone is?
Samsung Galaxy S8 with Android Pie
-
thanks, will check and reply later.
-
Hi kanppe, have you ever got Cross Hair work well after the upgrade?
if not, you might need to use "restore factory default" and then give it another shot.
-
Thanks, I was able to get past the error by re-installing the app and reflashing the crosshair controller.
-
Can I set macro manager through this app?
-
macro will be released later in our app.
-
that's awesome and convenient£¬thank you£¡
-
Everything works great but I got a problem that is very annoying. When I move my mouse the audio starts to shaking turning on and off. If I keep the mouse not moving it wont
-
If I turn up my dpi of mouse the audio shakes quicker
-
thanks, audio issued is confirmed, we are fixing it.
-
Sir，can i use StrikePack F.P.S. Dominator and crosshair together？Because it has mod inside.
-
So far I am liking the App and just really have one suggestion. You added the ability for sub/aux configs within each game. The only issue I have is those sub configs need deactivation keys to know you are back in hip. As in for example playing pubg and making an inventory sub config. Don’t click same button mapping. Then switch A & D to L1 R1 and W & S to up and down. That way when I go into inventory W,ASD now move me around inside inventory which is set as tab. Well on console you get used to using circle/b to back out of most things so setting a deactivation key to C on my keyboard which is circle/b on the console. Just a thought and would just make it easier to use overall.
-
we have a hotkey for each sub config(scenario)，and its mode can be changed to toggle.
so if you can set TAB as hotkey to enter this sub config(TBD1 for example),
while TAB brings up the inventory UI.
Click Tab again, you will leave this sub config and close inventory at the same time.
will this help you?
-
yes it helps but i don't use a keyboard so that's why i was asking for additional deactivation keys. i am managing. I do have a question though. Have updated firmware on app and crosshair. Am i wrong in saying there was a turn assist button before? I ask as this would come in handy for games like pubg where certain areas are really slow as in when you go into map. A turn assist would help move the cursor or even being able to change the sticks so i can control with left analog stick instead of mouse. I thought we had the ability to do that also but i can't find those options anymore. So any help would be greatly appreciated.
-
1. we have added a hotkey for HIP, so you can return to HIP with this hotkey.
Does your deactivation key work in the same way?
2. with our macro, you can set up 4 stick macros, use 4 keys to control stick up and down, left and right.
and you can also change the strength for those stick movements.