ReaSnow Forum
General Category => General-Discussion => Topic started by: kOrol on April 05, 2023, 11:08:57 PM
-
I received a message today that the staff of ricochet claims to have started the detection and ban of reasnow s1 xim apex, will we have a solution?
-
I don't think anything is going to happen. I've played 4 - 5 ranked matches yesterday via Xbox SX and nothing changed, no message, no anything.
-
for now, it's recommended to disable your macros and AA.
and add some to Stick Response Time in More in our APP.
we are working to deal with the new detection issue.
will provide an update once it's necessary.
-
for now, it's recommended to disable your macros and AA.
and add some to Stick Response Time in More in our APP.
we are working to deal with the new detection issue.
will provide an update once it's necessary.
So, Any suggested value for Stick Response? Thx
-
you can try 40~100ms,
use the bigger one, if it's acceptable.
-
I reduced the sens in the game from 20 ( HIP and ADS ) to 10 and doubled the sens in the app. I also reduced the polling rate in the app because no controller can handle 1000hz, just to be on the safe side. I had reduced the Sens InGame because of a thread in a forum. Because it was recommended there so that you can possibly prevent a check.
-
thanks for sharing those great ideas!
they are helpful!
-
you can try 40~100ms,
use the bigger one, if it's acceptable.
70 is fine for hip,40 is too high for ADS, I lowered it to 30ms , acceptable, but is it ok?
-
I reduced the sens in the game from 20 to 10 and doubled the sens in the app. I also reduced the polling rate in the app because no controller can handle 1000hz, just to be on the safe side. I had reduced the Sens InGame because of a thread in a forum. Because it was recommended there so that you can possibly prevent a check.
Thx for the information, and can u share what polling rate u r using at this moment?
-
I reduced the sens in the game from 20 to 10 and doubled the sens in the app. I also reduced the polling rate in the app because no controller can handle 1000hz, just to be on the safe side. I had reduced the Sens InGame because of a thread in a forum. Because it was recommended there so that you can possibly prevent a check.
Thx for the information, and can u share what polling rate u r using at this moment?
I'm currently using CoD 250hz in the app
-
for most of the controllers, the USB polling rate is 250hz.
-
I reduced the sens in the game from 20 to 10 and doubled the sens in the app. I also reduced the polling rate in the app because no controller can handle 1000hz, just to be on the safe side. I had reduced the Sens InGame because of a thread in a forum. Because it was recommended there so that you can possibly prevent a check.
Thx for the information, and can u share what polling rate u r using at this moment?
I'm currently using CoD 250hz in the app
Thx, I found mine is on 250hz already, I guess it is the default setting .
-
for most of the controllers, the USB polling rate is 250hz.
Hi, richard, as Willwas82 said, is that really necessary to low down the ingame sens and lift the sens in app? I did excatly as he told,and the feeling is pretty weird, so the question comes.
-
Yes, it plays a little differently. But that should be adjustable in the app. Very few controller players use HIP and ADS of 20. Therefore, it could soon happen that players with such settings take a closer look. You should react at the latest when the first warning is displayed on the monitor. But what's more important is whether it's just PC gamers where Cronus/Titan has been spotted, or console gamers as well? As long as it's only PC players, leaving the ingame sens at 20 shouldn't be a problem. I reduced mine to be safe.
-
Yes, it plays a little differently. But that should be adjustable in the app. Very few controller players use HIP and ADS of 20. Therefore, it could soon happen that players with such settings take a closer look. You should react at the latest when the first warning is displayed on the monitor. But what's more important is whether it's just PC gamers where Cronus/Titan has been spotted, or console gamers as well? As long as it's only PC players, leaving the ingame sens at 20 shouldn't be a problem. I reduced mine to be safe.
Hi Willwas, have u check the disscusion in Xim community. https://community.xim.tech/index.php?topic=104837.0 (https://community.xim.tech/index.php?topic=104837.0)
PS4 player got the warning.
In the end of this, they list something about how the detection works and some logics of avoidance
not sure reasnow will enhannce the left stick simulation or not. guess that should be useful.
-
Yes, it plays a little differently. But that should be adjustable in the app. Very few controller players use HIP and ADS of 20. Therefore, it could soon happen that players with such settings take a closer look. You should react at the latest when the first warning is displayed on the monitor. But what's more important is whether it's just PC gamers where Cronus/Titan has been spotted, or console gamers as well? As long as it's only PC players, leaving the ingame sens at 20 shouldn't be a problem. I reduced mine to be safe.
Hi Willwas, have u check the disscusion in Xim community. https://community.xim.tech/index.php?topic=104837.0 (https://community.xim.tech/index.php?topic=104837.0)
PS4 player got the warning.
In the end of this, they list something about how the detection works and some logics of avoidance
not sure reasnow will enhannce the left stick simulation or not. guess that should be useful.
The user had used the Titan Two, the macro or script was recognized. In the Xim forum it is assumed that these macros/scripts have to be randomized so that they are no longer detected. But these are all assumptions. As Richard had already written, it is advisable to disable macros and AA in the Reasnow app first.
-
Yes, it plays a little differently. But that should be adjustable in the app. Very few controller players use HIP and ADS of 20. Therefore, it could soon happen that players with such settings take a closer look. You should react at the latest when the first warning is displayed on the monitor. But what's more important is whether it's just PC gamers where Cronus/Titan has been spotted, or console gamers as well? As long as it's only PC players, leaving the ingame sens at 20 shouldn't be a problem. I reduced mine to be safe.
Hi Willwas, have u check the disscusion in Xim community. https://community.xim.tech/index.php?topic=104837.0 (https://community.xim.tech/index.php?topic=104837.0)
PS4 player got the warning.
In the end of this, they list something about how the detection works and some logics of avoidance
not sure reasnow will enhannce the left stick simulation or not. guess that should be useful.
The user had used the Titan Two, the macro or script was recognized. In the Xim forum it is assumed that these macros/scripts have to be randomized so that they are no longer detected. But these are all assumptions. As Richard had already written, it is advisable to disable macros and AA in the Reasnow app first.
never used a macro, but worry about the detection on 8 directions and thats why Im wondering reasnow has or gonna have the cloak for this.
-
stick simulation has been added long ago,
once a button is mapped to a stick or a trigger,
this feature will be active.
try a bigger Stick Response Time, if you are worried about that.
-
stick simulation has been added long ago,
once a button is mapped to a stick or a trigger,
this feature will be active.
try a bigger Stick Response Time, if you are worried about that.
Hi, Richard. Thx for the information，do u mean the left stick(WASD) is not working on only 8 directions already? If that is so, it is so nice to hear it.
-
yes, of course. some randomized angles have already been added since the issue with Fortnite's detection
-
Cool, good to know, thx! Richard
-
stick simulation has been added long ago,
once a button is mapped to a stick or a trigger,
this feature will be active.
try a bigger Stick Response Time, if you are worried about that.
I can't find where to set the stick simulation. Is it auto applied? Also is it still safe to use S1 without plugin a controller?
-
I have the S1 hooked to my xbox x, I?ve been using it with its default settings, no macros nor adjusted Aim Assist values. Since COD started to detect these devices, what are your recommendations to keep enjoying it off the radar? My in game sensitivity is set to 13 for Ver. & Hor. Also, I?ve adjusted the HIP in the app to 1.28 and the ADS to 1, anything else I need to change? other settings are still intact (left on default). Thank you
-
1. stick simulation will be applied automatically.
2. it's completely safe to use S1 without a controller on PC.
-
we are working to deal with the new detection issue.
will provide an update once it's necessary.
Here are some recommendations here all S1 users:
1. disable your macros and AA.
2. add some to Stick Response Time(40~80ms) in More in our APP.
3. set USB polling rate to 250hz in global settings
4. set in-game sensitivities a bit lower than the MAX.
-
we are working to deal with the new detection issue.
will provide an update once it's necessary.
Here are some recommendations here all S1 users:
1. disable your macros and AA.
2. add some to Stick Response Time(40~80ms) in More in our APP.
3. set USB polling rate to 250hz in global settings
4. set in-game sensitivities a bit lower than the MAX.
Hi Richard, just wanted to go over what you have mentioned and check if there are other things I may need to be aware of. I have no activated macros and the AA (Aim Assist) is set to the default value =1, the Stick Response Time is also on the default value =40, polling rate is 250 which default as well, and the in-game sense is set to 15 for vertical and horizontal. Furthermore, I doubled the in-app hip to 1.28 to compensate the reduced in-game sensitivity. Anything else I need to check or edit?
-
seems ok:)
ps: cancel the hotkey for AA in our APP to avoid activation by accident.
-
For the last few days I had played CoD MW2 with in-game settings as recommended in the app, 1000hz polling rate in the S1, activated AA and No Recoil Macro. The S1 was "not" discovered. No ban in game. (XBox Series S)
-
thanks for sharing your experiences:)
-
Please try our latest beta firmware v5.6.107, which can be found here:
http://www.reasnow.com/forum/index.php?topic=3025.0
Some recommendations:
1. set USB report rate to 250hz in global settings in our APP
2. suspend your usage of macros temporarily
while playing some games, such as R6, COD, Destiny 2
Any feedback is welcomed!