Author Topic: Reasnow Manager App (Read 3322 times)

LikeABoss · « **on:** March 05, 2019, 11:52:19 PM »

So I was able to flash the crosshair and downloaded the app on my tablet go to connect and keep getting “command error 2” can’t get past this please help so I can use the app for configuration.

LikeABoss · « **Reply #1 on:** March 06, 2019, 01:09:21 AM »

Ok I got it working after redoing it all again

LikeABoss · « **Reply #2 on:** March 06, 2019, 01:42:44 AM »

Ok so I really like the addition of sub configs will make pubg playable with m&k. I had my Sony Nav hooked up wireless but since updating and now running through app manager I can only use it in wired. Is there a step I am missing or if running through the app because it's bluetooth I can't run the Nav wirelessly? Please let me know if this can be achieved

richard · « **Reply #3 on:** March 06, 2019, 10:24:06 AM »

yes, we have not added the BT wireless controller support in this version,
but it will be done later:)

might be in the next release.

richard · « **Reply #4 on:** March 06, 2019, 10:26:07 AM »

glad to know you can have it work properly,
any feedback, please just post it here with full details.

we will respond asap.

Gyftos · « **Reply #5 on:** March 06, 2019, 11:06:49 AM »

I have one question Richard is it possible to do on an iPhone Or is it just android?

Gyftos · « **Reply #6 on:** March 06, 2019, 11:09:04 AM »

The app looks amazing by the way

Gyftos · « **Reply #7 on:** March 06, 2019, 11:10:08 AM »

Also does it work with the older firmware crosshairs?

Gyftos · « **Reply #8 on:** March 06, 2019, 11:16:09 AM »

I’m sorry I meant does it work with the hardware version 1.7.4 ? 😳

richard · « **Reply #9 on:** March 06, 2019, 11:17:52 AM »

if Hardware Ver<1.7.6, it can not be upgraded to use our APP.

Gyftos · « **Reply #10 on:** March 06, 2019, 11:21:47 AM »

where can i get one croshair that is compatible with the app? is there an exchange program ?

richard · « **Reply #11 on:** March 06, 2019, 11:24:29 AM »

and yes, we will release iOS version later.
but android phones are more convenient than iphones for such a beta test.

Gyftos · « **Reply #12 on:** March 06, 2019, 11:28:11 AM »

So will this app be released for versions 1.7.4 or should I buy a new crosshairs?

richard · « **Reply #13 on:** March 06, 2019, 11:37:06 AM »

V1.7.4 or similar old versions(<1.7.6) have no sufficient space to store our new firmware, sorry for that.
you will need a new one to use our app,
or the flea market might help you.

Gyftos · « **Reply #14 on:** March 06, 2019, 04:43:58 PM »

Richard can you please tell me how I can make sure that the new crosshair I buy is the version Hardware ?

kanppe · « **Reply #15 on:** March 06, 2019, 10:26:58 PM »

I also get the "command error: 2" when starting the app

Code: [Select]

03-06 16:22:53.150 10297 10308 D BluetoothGatt: onConnectionUpdated() - Device=00:15:83:83:71:47 interval=38 latency=0 timeout=500 status=0
03-06 16:22:53.150 10297 10324 D libapp.so: BluetoothDevice::State(DiscoveredDetails)
03-06 16:22:53.151 10297 10324 D BluetoothGatt: setCharacteristicNotification() - uuid: 840f2b15-f273-49fe-a910-21ef907f2434 enable: true
03-06 16:22:53.154 10297 10324 D QtBluetoothGatt: Enable notifications: true
03-06 16:22:53.157 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 7 Write (false) ValueKnown: true Skipping: false Descriptor
03-06 16:22:53.244 10297 10324 D libapp.so: BluetoothDevice::State(EnabledNotification)
03-06 16:22:53.244 10297 10324 D libapp.so: BluetoothDevice::dataWrite "02000000"
03-06 16:22:53.247 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 5 Write (true) ValueKnown: true Skipping: false Characteristic
03-06 16:22:53.340 10297 10324 D libapp.so: ProtocolProxy::onDataReceived: "02000b000100010002320102230b00"
03-06 16:22:53.349 10297 10324 D libapp.so: BluetoothDevice::dataWrite "01000000"
03-06 16:22:53.353 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 5 Write (true) ValueKnown: true Skipping: false Characteristic
03-06 16:22:53.435 10297 10324 D libapp.so: ProtocolProxy::onDataReceived: "0100200001060b00040202050707010003022f0056000351373235383433000100000000"
03-06 16:22:53.437 10297 10324 D libapp.so: BluetoothDevice::dataWrite "0400010000"
03-06 16:22:53.440 10297 10324 W QtBluetoothGatt: Performing queued job, handle: 5 Write (true) ValueKnown: true Skipping: false Characteristic
03-06 16:22:53.529 10297 10324 D libapp.so: ProtocolProxy::onDataReceived: "04020000"
03-06 16:22:53.535 10297 10324 W libapp.so: ProtocolProxy::onDataReceived State Error !!! 2
03-06 16:23:19.936 10297 10297 D InputMethodManager: prepareNavigationBarInfo() DecorView@b1e3427[ReaSnowActivity]
03-06 16:23:19.936 10297 10297 D InputMethodManager: getNavigationBarColor() -855310
03-06 16:23:19.937 10297 10297 V InputMethodManager: Starting input: tba=com.reasonw ic=null mNaviBarColor -855310 mIsGetNaviBarColorSuccess true , NavVisible : true , NavTrans : false
03-06 16:23:19.937 10297 10297 D InputMethodManager: startInputInner - Id : 0
03-06 16:23:19.937 10297 10297 I InputMethodManager: startInputInner - mService.startInputOrWindowGainedFocus
03-06 16:23:19.941 10297 10297 D InputTransport: Input channel constructed: fd=90
03-06 16:23:19.941 10297 10297 D InputTransport: Input channel destroyed: fd=72
03-06 16:23:20.338 10297 10297 D CrashReport: >>> com.reasonw.ReaSnowActivity onPaused <<<

richard · « **Reply #16 on:** March 06, 2019, 11:11:22 PM »

your phone is?

kanppe · « **Reply #17 on:** March 06, 2019, 11:36:35 PM »

Quote from: richard on March 06, 2019, 11:11:22 PM

your phone is?

Samsung Galaxy S8 with Android Pie

richard · « **Reply #18 on:** March 06, 2019, 11:49:50 PM »

thanks, will check and reply later.

richard · « **Reply #19 on:** March 07, 2019, 11:00:39 AM »

Hi kanppe, have you ever got Cross Hair work well after the upgrade?
if not, you might need to use "restore factory default" and then give it another shot.