Author Topic: Fortnite  (Read 302 times)

Sauron

  • Jr. Member
  • **
  • Posts: 59
Fortnite
« on: September 25, 2019, 03:37:26 AM »
https://www.epicgames.com/fortnite/en-US/news/aim-high-test-your-skills-in-the-combine?lang=en-US

Hello, Richard, in the next update, we will find many changes in the aiming and rotation system of the camera. Can we wait a profile that will be adapted to these changes?

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #1 on: September 25, 2019, 04:04:49 PM »
thanks for the feedback,
will check and update the profile definitely.

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #2 on: September 27, 2019, 12:19:01 PM »
just update our fortnite,
please set your game as shown below:

Sensitivity:
Look Sensitivity=10(Insane)
Aim Sensitivity=10(Insane)
Build Mode Sensitivity Multiplier=1.0x
Edit Mode Sensitivity Multiplier=1.0x
Use Advanced Options=OFF

all others=defaults

ReaSnow S1(defaults fortnite config) + Mouse(5000-8000DPI/500HZ)

Sauron

  • Jr. Member
  • **
  • Posts: 59
Re: Fortnite
« Reply #3 on: September 29, 2019, 09:22:31 PM »
Amazing! But i have old CrossHair 1.7.5 hardware version and can't buy S1 right now :)

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #4 on: September 29, 2019, 10:20:46 PM »
so use the same settings for your game and mouse,
and activate fortnite default config in Cross Hair,
there will be no problem too.

Sauron

  • Jr. Member
  • **
  • Posts: 59
Re: Fortnite
« Reply #5 on: September 30, 2019, 11:58:38 PM »
I thought that you updated the profile using the new advanced settings. But since you didn’t do this, in order to use the old settings (before patch 10.40), you need to enable the "legacy controls" item in the additional settings.

What you wrote above (10 insane) includes a new control system with a very strong aiming, which is not controlled at all.

I always play on the recommended settings. I have a Mouse Logeitech G102 (8000 DPI max and 500hz polling rate). I play on average sensitivity multiplied by 1.5 in the profile settings.

But that is not the problem.

The problem is that the profile has not been updated since the fifth or sixth season of the game, when Epic Games changed the aiming system in each new season. I often play Fortnite, I feel it.

Unfortunately, I cannot play Fortnite with official keyboard and mouse support, as my keyboard stops working after a while. PS4 turns it off. You need to disconnect the keyboard from USB and reconnect directly during the battle. It is not comfortable. On a PC, this keyboard works just fine. This is a PS4 issue.

Therefore, it remains to play through the emulator. But let's see what happens with your competitors. They have rewritten their Fortnite profile several times over the past seasons and will do it again now with the release of new settings.

You can read it here:

https://community.xim.tech/index.php?topic=81568.0

They even have a SEPARATE PROFILE for PvE Fortnite Save the World, because there is different shooting mechanics.

Fortnite is a very popular game, it is played by millions of people. If you find it difficult every 2 months to issue a profile update for old CrossHair, give the ability to change the profile. Not only change the sensitivity and XY ratio with ballistic curves, but also add Simulated Analog Behavior (SAB) to the Custom Profile, dead zone, etc.

Try moving the mouse to the left on the old profile of the game, and then sharply to the right. You will understand what I mean. If you enable the linear ballistic curve in the advanced settings and enable the Overwatch profile, the movements will be better than on the Fortnite profile with 10 insane values, but I can not play with the Overwatch profile, since there is no Simulated Analog Behavior (SAB) there.

I hope this situation can be somehow corrected if you want to sell as much CrossHair as they sell XIM APEX.

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #6 on: October 01, 2019, 10:13:28 AM »
we tried old cross hair's preset for fornite,
mouse control is acceptable.

but if you do need an update for this game,
it wil be provided later.
just a piece of cake:)

BTW, this board is for S1,
all your questions will be replied as before,
if it's posted properly in the board for Cross Hair.

feedback from you and all other customers is valuable to us!

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #7 on: October 07, 2019, 08:14:48 PM »
low-speed part of this game does change a bit,
will provide an update for preset config in a couple of days after the test.

Sauron

  • Jr. Member
  • **
  • Posts: 59
Re: Fortnite
« Reply #8 on: October 08, 2019, 02:09:17 AM »
Great news. Thanks.

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #9 on: October 11, 2019, 05:58:17 PM »
please try this version and any feedback is welcomed:
http://www.reasnow.com/download/software/Cross%20Hair%20ManagerV1.73.56.zip

BTW, this topic will soon be moved to the board for Cross Hair.


Sauron

  • Jr. Member
  • **
  • Posts: 59
Re: Fortnite
« Reply #10 on: October 13, 2019, 01:39:34 AM »
Very good job, Richard. The movements became smooth. This is what I wanted. Thanks.

PS I use 6000 DPI and 1000 poling rate on my mouse right now. I think it is better than 8000 DPI / 500 hz

richard

  • Global Moderator
  • *****
  • Posts: 2035
Re: Fortnite
« Reply #11 on: October 13, 2019, 06:01:51 PM »
it is good news:)

have fun! and we love your feedback as always!