Author Topic: About setting for steam controller in V 4.5.111  (Read 113 times)

mervynxu

  • Newbie
  • *
  • Posts: 2
About setting for steam controller in V 4.5.111
« on: January 15, 2020, 11:31:55 AM »
Hi , I have connected the steam controller to cross hair in V4.5.111 , it can be recognized as a controller and  all keys are available. But the right stick mode is "Stick mode like " , very hard to control . I want to set the right stick to mouse mode , using the right side pad as a mouse move , how I should do ?  :(

richard

  • Global Moderator
  • *****
  • Posts: 2147
Re: About setting for steam controller in V 4.5.111
« Reply #1 on: January 15, 2020, 12:21:01 PM »
mouse mode is not suitable to be used on video game consoles,
its dpi is too low.
will be very hard to make a turn.

mervynxu

  • Newbie
  • *
  • Posts: 2
Re: About setting for steam controller in V 4.5.111
« Reply #2 on: January 15, 2020, 07:05:40 PM »
Hi Richard

Thanks. 

I just tried two modes -  V4.5.111 would be the joy stick mode and V5 would be the mouse mode . I use the default settings in V4 , turning and aming is just very slow. Back to V5 , fast when using mouse mode. ( In V5 , the steam controller is regconized as a K/M . )


But i cannot map the X and Y key , Logo Key in V5 , and the right arrow key and B shares the same " escape " key .


Could you share the setting in V4 ? I am not quite sure whether my sets are wrong.



richard

  • Global Moderator
  • *****
  • Posts: 2147
Re: About setting for steam controller in V 4.5.111
« Reply #3 on: January 17, 2020, 08:13:16 AM »
are you using Cross Hair + BT dongle + steam controller for V5?
as shown in this topic:
http://www.reasnow.com/forum/index.php?topic=2575.0