Author Topic: anti-recoil macro feels very strange to use  (Read 4268 times)

k162

  • Newbie
  • *
  • Posts: 14
anti-recoil macro feels very strange to use
« on: June 26, 2021, 12:17:30 AM »
before I got reasnow S1, and then set up the anti recoil macro. This macro works very well without moving the mouse. It can make the gun like a laser gun. But if the target is moving, when you try to make the front sight follow the target, the trouble will come. The front sight will float around, sometimes up, sometimes down, which is very difficult to control
What is the reason? How to solve it?
thank you!

richard

  • Global Moderator
  • *****
  • Posts: 4833
Re: anti-recoil macro feels very strange to use
« Reply #1 on: June 26, 2021, 04:06:21 PM »
We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model, and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc. 
   it's better to restore all settings in game and change the settings as shown in our APP, and try it again with a default game config.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version

k162

  • Newbie
  • *
  • Posts: 14
Re: anti-recoil macro feels very strange to use
« Reply #2 on: June 27, 2021, 02:33:09 PM »
We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model, and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc. 
   it's better to restore all settings in game and change the settings as shown in our APP, and try it again with a default game config.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version
1:ps5 r6 and bf5
2.20000dpi,usb report 1000hz
3.app Recommend setting
4. default setting
5.new

richard

  • Global Moderator
  • *****
  • Posts: 4833
Re: anti-recoil macro feels very strange to use
« Reply #3 on: June 28, 2021, 10:25:24 AM »
2. mouse should be set to 5000DPI/500HZ, if 3 is the default.
4. in-game settings should be set as recommended in our APP.

k162

  • Newbie
  • *
  • Posts: 14
Re: anti-recoil macro feels very strange to use
« Reply #4 on: June 28, 2021, 10:59:32 AM »
2. mouse should be set to 5000DPI/500HZ, if 3 is the default.
4. in-game settings should be set as recommended in our APP.
I heard that higher DPI and reporting rate will be more accurate. Why set DPI to 5000 and reporting rate to 500? Doesn't reasnow S1 support 1000Hz reporting rate?
In addition, my mouse supports 20000 DPI and 1000 Hz reporting rate.
Thank you for your answer!

richard

  • Global Moderator
  • *****
  • Posts: 4833
Re: anti-recoil macro feels very strange to use
« Reply #5 on: June 28, 2021, 11:15:21 AM »
ReaSnow S1 does support 1000hz, there is no doubt about that.

here are some more explanations for choosing a DPI:

1. DPI
based on the data we got from many mice,
with a high DPI(10000DPI or above),
some mouse will easily detect the tiny shaking of your hands or even the desk,
uneven mousepads will also bring trouble for your aiming.

you will not like that for fps games.

5000dpi~8000dpi can give enough turning speed and much better and stabler aiming,
which is critical for gamers.

2. USB report rate
yes, as you can see from many USB analyzers or mouse testers,
the USB report rate can't be kept as 1000HZ even if it's set to 1000hz.

so why shall we use the report rate which can be kept by the mouse itself,
stability and reliability during the intense competition will be a great advantage for most gamers.

3. ReaSnow S1's engine is trained and tested with 5000DPI/500HZ.
   we always use 5000dpi during all these procedures,
   so 5000dpi will be a good choice for the defaults settings in ReaSnow S1

AH

  • Newbie
  • *
  • Posts: 13
Re: anti-recoil macro feels very strange to use
« Reply #6 on: August 06, 2021, 05:47:39 PM »
you can try this

AH

  • Newbie
  • *
  • Posts: 13
Re: anti-recoil macro feels very strange to use
« Reply #7 on: August 07, 2021, 09:58:09 AM »