Author Topic: I have issue with azeron cyborg in the last firmware (Read 8153 times)

Stilen999 · « **on:** January 24, 2022, 05:46:22 PM »

Hello everyone yesterday, I just upgraded to the latest version and had a problem even though it was not in my previous updates, if I use the azeron cyborg joystick the reasnow manager can't read the left input commands

richard · « **Reply #1 on:** January 24, 2022, 11:08:03 PM »

1. do you have the same issue with our old firmware version?
2. can you show us your current issue with a video? we would like to see the ins and outs on the HOME screen when I/O monitor is enabled.

Stilen999 · « **Reply #2 on:** January 25, 2022, 01:29:51 AM »

https://youtu.be/uT6hPGbJlmQ

Stilen999 · « **Reply #3 on:** January 25, 2022, 10:08:43 PM »

Hi Richard, did you watch the video, do you know what the problem is? Any update ?

richard · « **Reply #4 on:** January 26, 2022, 10:15:17 PM »

will reply later.
does this keyboard ever work properly with our S1? which firmware version were you using then?

Stilen999 · « **Reply #5 on:** January 27, 2022, 03:59:01 AM »

Azeron Cyborg ran on version 5.4.38 and earlier without problems
Then I upgraded the firmware to 5.4.45 and the problem started here.
Now if you go back to the old versions, it's the same proplem

richard · « **Reply #6 on:** January 27, 2022, 12:44:53 PM »

maybe these old versions will help:
http://www.reasnow.com/download/ReaSnowApp/ReaSnow%20Flash%20Tool%20V5.3.63.zip
http://www.reasnow.com/download/ReaSnowApp/ReaSnow%20Manager%20V1.2.42.apk

Stilen999 · « **Reply #7 on:** January 27, 2022, 01:46:00 PM »

Thank you for your efforts,
I downloaded the firmware but it didn't work because the iOS manager needs to be updated to match the firmware you sent,
You have sent APK Manager for Android
Can you please , send an old manager for iOS ,
To match the firmware you sent, by testflight

Stilen999 · « **Reply #8 on:** January 27, 2022, 01:57:04 PM »

When I open the manager ios this message appears on the phone,
Please upgrade to the latest firmware

richard · « **Reply #9 on:** January 27, 2022, 02:05:36 PM »

sorry, there is no way to release an old version app on app store.
can you try an android phone just for testing?
so we make know what has caused it.
we might provide an update based on the latest firmware and app to address your issue later.

Stilen999 · « **Reply #10 on:** January 27, 2022, 02:08:35 PM »

Ok no problem,
Thank you for your efforts

Stilen999 · « **Reply #11 on:** January 27, 2022, 02:15:26 PM »

I will quote and test Android phone
I'll tell you later what happened after the test

Stilen999 · « **Reply #12 on:** January 28, 2022, 07:37:04 AM »

Hi Richard, I know where the problem is.
The problem is not in the Reasnow S1 firmware.
The problem was with firmware updates and Azeron Cyborg apps.
(I'm back to an older firmware version from wibesite azeron),
after that ,
I've tried the latest reasnow s1 app firmware beta , be it Android or iOS, and I haven't had any issues.
I'm sorry I bothered you
Thank you for your response and efforts. I am very grateful to you

Stilen999 · « **Reply #13 on:** January 28, 2022, 07:52:31 AM »

I now use
azeron cyborg:
Application version: v0.22.0

Device Firmware Version: v57.0
-----------------------
reasnow s1:
With the latest versions of the manager and beta firmware without any problem
Thank you so much again

richard · « **Reply #14 on:** January 28, 2022, 10:42:10 PM »

thanks for sharing your experiences with us!
glad to help as the best as we can:)

richard · « **Reply #15 on:** February 08, 2022, 11:28:04 AM »

Hi Stilen999,
can you check and provide the PID/VID of your keyboard again?
the PID/VID might be changed when the new firmware is used.

Stilen999 · « **Reply #16 on:** February 09, 2022, 06:57:51 AM »

Of course, I am happy to serve you or the community

Stilen999 · « **Reply #17 on:** February 09, 2022, 07:11:55 AM »

https://youtu.be/kBffhwcKJ8g

richard · « **Reply #18 on:** February 09, 2022, 10:51:43 AM »

sorry, but this is not the PID/VID of your keyboard when it's upgraded with the new firmware from Azeron.
you can check that by connecting your azeron keyboard to a PC.

Stilen999 · « **Reply #19 on:** February 09, 2022, 01:13:25 PM »

I'm sorry ,
Where can I find the PID / VID in the pc ,
Or is there a specific program to use?