Administrator, I need to address the sensitivity issue regarding DPI and data.

[liangfeng1107]

Is there any difference between a device with a sensitivity of 1.0 dpi and a sensitivity of 2400 and one with a sensitivity of 0.3 dpi and a sensitivity of 8000? Because the converted edpi is 2400 for both, the sensitivity seems to be the same. But should one choose a lower dpi or a higher dpi
My current device has a resolution of 2400dpi and a frequency of 500hz

Another issue is that when using the same configuration and files, my xbox data is 1.0dpi 2400, but the ps4 data is 1.02400dpi. The sensitivity is different and it will be much slower. How can I adjust it to the same sensitivity? Because the performance of xbox and ps4 is different, and the crosshain delay of xbox seems to be quite large but very smooth, while that of ps4 is fast but unstable, both of these boot guides have their own advantages. In apex, the aa of ps4 seems to be more powerful
设备灵敏度是1.0 dpi是2400 与设备灵敏度0.3 dpi灵敏度是8000他们有什么区别吗 因为换算下来的edpi都是2400 灵敏度好像是一样的 但是该选择低的dpi还是高的dpi
我目前设备是2400dpi 500hz

另外还有一个问题 使用相同的配置与文件的时候 我的xbox数据是1.0 dpi2400  但是ps4数据1.0 2400dpi灵敏度不一样会慢很多 我该怎么调到一个相同的灵敏度？ 因为xbox和ps4的表现不一样 而且xbox的准星延迟视乎很大但是很平滑 ps4的很快 但是不稳定 这两种启动引导各有优点 在apex中 ps4的aa好像更强大

[Austin]

1. As you mentioned, the calculated equivalent EDPI values are indeed identical. However, from a performance perspective, we recommend pairing a high mouse DPI with a low sensitivity setting.
2. Speed varies across different console platforms, so sensitivity values cannot be universally applied. Generally, at the same mouse movement speed, the sensitivity value on Xbox is significantly lower than that on PlayStation.
If you wish to maintain the same mouse movement speed across both consoles, you'll need to adjust settings individually?there is no universal conversion factor.

[liangfeng1107]

Hello, Please watch these two videos. They have a sensitivity of 0.3 with 8000dpi and a sensitivity of 1.0 with 2400dpi. I can guarantee that the same configuration file is used, but I found that the lower the sensitivity, the worse the fine-tuning operability of the crosshain. This is completely opposite to what you said about low sensitivity with high dpi. And no matter how the dpi is set The lower the sensitivity, the worse the crosshair performance. What causes this? My s1 Settings are 0.3 sensitivity, 8000dpi, minimum speed 4, smooth 20, synchronous 20. However, I prefer a sensitivity of 0.5-1.0 because it can maintain the fine-tuning of the crosshain while making it easier to use aa for assisted aiming

[Austin]

Please provide quantifiable comparison results; your perception may not be accurate.