1
ReaSnow S1 / Re: need config sea of thieves
« Last post by Austin on Today at 09:34:22 AM »The config has been added.
Recent Posts
2
ReaSnow S1 / Re: Does PlayStation Move work as an authentication controller?
« Last post by Austin on Today at 09:31:39 AM »The PlayStation Move controller can't be an authentication controller.
3
ReaSnow S1 / Re: Reasnow S1 not working together with Beloader pro
« Last post by Hiroyuki on Today at 09:29:16 AM »Please try the following steps
http://www.reasnow.com/forum/index.php?topic=3995.0
1.Connect BeroderPro to the LAN cable and USB power supply (upper left). The USB can be connected to the back port of the PS5 or directly powered from a smartphone charger, for example.
2.Press the bottom left button on BeroderPro to confirm remote connection (BeroderPro LED lights up green).
3.With this state, connect Reasnow to BeroderPro (it is essential to connect the genuine controller of the PS5 to Reasnow).
4.If the connection fails, the LED on Reasnow will blink green and red, and the connection on BeroderPro will also be cut off. In this case, unplug the cable and start over from step 2.
5.Check that both Reasnow and BeroderPro are connected and their LEDs are lit green.
6.Finally, connect the headset to BeroderPro.
7.Connect the BeroderPro audio USB (upper right) to the front port of the PS5. If a loud announcement in Chinese is played when connected, the connection is successful.
However, if steps 6 and 7 are done in the wrong order, the volume may be too low or there may be severe noise on the microphone. Also, steps 2 and 3 may need to be repeated several times, but once the connection is successful, it will be stable.
http://www.reasnow.com/forum/index.php?topic=3995.0
1.Connect BeroderPro to the LAN cable and USB power supply (upper left). The USB can be connected to the back port of the PS5 or directly powered from a smartphone charger, for example.
2.Press the bottom left button on BeroderPro to confirm remote connection (BeroderPro LED lights up green).
3.With this state, connect Reasnow to BeroderPro (it is essential to connect the genuine controller of the PS5 to Reasnow).
4.If the connection fails, the LED on Reasnow will blink green and red, and the connection on BeroderPro will also be cut off. In this case, unplug the cable and start over from step 2.
5.Check that both Reasnow and BeroderPro are connected and their LEDs are lit green.
6.Finally, connect the headset to BeroderPro.
7.Connect the BeroderPro audio USB (upper right) to the front port of the PS5. If a loud announcement in Chinese is played when connected, the connection is successful.
However, if steps 6 and 7 are done in the wrong order, the volume may be too low or there may be severe noise on the microphone. Also, steps 2 and 3 may need to be repeated several times, but once the connection is successful, it will be stable.
4
ReaSnow S1 / Re: Xim matrix with s1
« Last post by Austin on Today at 09:28:12 AM »Maybe you can plug ReaSnow S1 as a 3rd party controller into xim matrix. But we don't know how to set up xim matrix, you can search on Google.
5
ReaSnow S1 / Re: After update S1 no longer works
« Last post by vladislav on May 06, 2024, 03:23:57 PM »I was wondering, how did you solve the problem?
6
ReaSnow S1 / Re: After update S1 no longer works
« Last post by Fletcher on May 06, 2024, 02:24:45 PM »Which version of firmware are you using?
Problem is solved, thank you.
7
ReaSnow S1 / Re: Xim matrix with s1
« Last post by Bscoy on May 06, 2024, 12:03:00 PM »To play ps5 games on reasnow s1 whats happend to d1 by the way?
8
ReaSnow S1 / Re: After update S1 no longer works
« Last post by Austin on May 06, 2024, 09:56:59 AM »Which version of firmware are you using?
9
ReaSnow S1 / Re: SCROLL DO MOUSE PARANDO DE FUNCIONAR
« Last post by Austin on May 06, 2024, 09:55:32 AM »Pode gravar um v?deo para nos mostrar o fen?meno?
10
ReaSnow S1 / Re: Xim matrix with s1
« Last post by Austin on May 06, 2024, 09:52:50 AM »Why would you do that?