ReaSnow Forum

Products => ReaSnow S1 => Topic started by: Momo on April 20, 2022, 01:16:17 PM

Title: S1 disconnect recently and stable blue
Post by: Momo on April 20, 2022, 01:16:17 PM

firmware is 5.5.6. unplug and replug it will solve this but it's Keep appearing is kinda annoying.

Title: Re: S1 disconnect recently and stable blue
Post by: Momo on April 20, 2022, 04:15:13 PM

stable blue with 1 beep. it says instantaneous high-load current on the manual. what does that mean.

Title: Re: S1 disconnect recently and stable blue
Post by: Momo on April 21, 2022, 12:51:56 AM

Sometimes with four beeps. what should I do? Do I have to buy a new one?

Title: Re: S1 disconnect recently and stable blue
Post by: richard on April 21, 2022, 10:25:41 AM

if it's blue with 1 beep, here are some tips for you
1. try some new USB cables for your controller
2. try replacing some peripherals which are connected to ReaSnow S1
3. ESD protection

Please check this page for more details and description of ESD:)
https://en.wikipedia.org/wiki/Electrostatic_discharge

how to get rid of ESD:
https://fosterpandh.com/blog/how-to-get-rid-of-static-electricity-in-your-home
https://housewifehowtos.com/clean/how-to-get-rid-of-static-electricity/

if it's blue with 4 beeps, and it shows repeatedly.
that is a hardware failure.
then you will have to contact the seller for a Warranty and Repairs.