ReaSnow Forum

Products => ReaSnow S1 => Topic started by: choikiyeon on April 24, 2022, 04:04:28 PM

Title: S1 doesn't work
Post by: choikiyeon on April 24, 2022, 04:04:28 PM

https://youtu.be/pBVcmk0W_s4

https://youtu.be/slxSfyzml50

If you watch the video, the symptoms are:

 :'(

connected to ps5


It's the same when I connect to the beloader

Title: Re: S1 doesn't work
Post by: richard on April 25, 2022, 12:04:24 PM

flashing red means your ReaSnow S1 is working well, just add a config into S1 with our APP.
please follow this video carefully:
https://www.youtube.com/watch?v=hjKieqjSTis&list=PL_W7SvvWDzBPFvHoHHBAEnCpz0UuL5eJq&index=24

PS:
do not plug Beloader into the USB ports on the back of PS5, it's too hot there, and the hot air might bring trouble to Beloader.
a USB extender will help.

Title: Re: S1 doesn't work
Post by: choikiyeon on April 26, 2022, 10:52:44 PM

S1 works fine . thank you :'(

PS5 front usb not available What should I do?

Title: Re: S1 doesn't work
Post by: richard on April 28, 2022, 05:19:02 PM

its front USB port gives a higher voltage(5.5V~5.7V) than expected,
and so brings this incompatiblity issue to S1.