Cod 2022 for reasnow s1 detecting

[TestMove]

Cool, good to know, thx! Richard

[davzh08]

stick simulation has been added long ago,
once a button is mapped to a stick or a trigger,
this feature will be active.

try a bigger Stick Response Time, if you are worried about that.

I can't find where to set the stick simulation. Is it auto applied? Also is it still safe to use S1 without plugin a controller?

[SHAMANY]

I have the S1 hooked to my xbox x, I?ve been using it with its default settings, no macros nor adjusted Aim Assist values. Since COD started to detect these devices, what are your recommendations to keep enjoying it off the radar? My in game sensitivity is set to 13 for Ver. & Hor. Also, I?ve adjusted the HIP in the app to 1.28 and the ADS to 1, anything else I need to change? other settings are still intact (left on default). Thank you

[richard]

1. stick simulation will be applied automatically.
2. it's completely safe to use S1 without a controller on PC.

[richard]

we are working to deal with the new detection issue.
will provide an update once it's necessary.

Here are some recommendations here all S1 users:
1. disable your macros and AA.
2. add some to Stick Response Time(40~80ms) in More in our APP.
3. set USB polling rate to 250hz in global settings
4. set in-game sensitivities a bit lower than the MAX.

[SHAMANY]

we are working to deal with the new detection issue.
will provide an update once it's necessary.

Here are some recommendations here all S1 users:
1. disable your macros and AA.
2. add some to Stick Response Time(40~80ms) in More in our APP.
3. set USB polling rate to 250hz in global settings
4. set in-game sensitivities a bit lower than the MAX.

Hi Richard, just wanted to go over what you have mentioned and check if there are other things I may need to be aware of. I have no activated macros and the AA (Aim Assist) is set to the default value =1, the Stick Response Time is also on the default value =40, polling rate is 250 which default as well, and the in-game sense is set to 15 for vertical and horizontal. Furthermore, I doubled the in-app hip to 1.28 to compensate the reduced in-game sensitivity. Anything else I need to check or edit?

[richard]

seems ok:)
ps: cancel the hotkey for AA in our APP to avoid activation by accident.

[Willwas82]

For the last few days I had played CoD MW2 with in-game settings as recommended in the app, 1000hz polling rate in the S1, activated AA and No Recoil Macro. The S1 was "not" discovered. No ban in game. (XBox Series S)

[richard]

thanks for sharing your experiences:)

[richard]

Please try our latest beta firmware v5.6.107, which can be found here:
http://www.reasnow.com/forum/index.php?topic=3025.0

Some recommendations:
1. set USB report rate to 250hz in global settings in our APP
2. suspend your usage of macros temporarily
   while playing some games, such as R6, COD, Destiny 2

Any feedback is welcomed!