Author Topic: Ajuda no macro (Read 8565 times)

Ucaio99 · « **on:** April 15, 2021, 05:51:40 PM »

Richard, how can you help me when I create a macro for the game? The sights are too heavy. How can you help me to let her loose?

richard · « **Reply #1 on:** April 17, 2021, 10:51:33 AM »

can you elaborate on your issue with macros?
give us as many details as possible

Ucaio99 · « **Reply #2 on:** April 17, 2021, 07:51:08 PM »

so Richard when I activate the macro there Iâ€™m in an exchange I want to pull it out so that the crosshairs are heavy to pull I wanted to know if you can let it go looser?

richard · « **Reply #3 on:** April 17, 2021, 11:02:17 PM »

do you mean that you feel the crosshair on-screen is heavy to be moved if an anti-recoil macro is activated?
ReaSnow S1 or Cross Hair?

Ucaio99 · « **Reply #4 on:** April 18, 2021, 05:10:41 AM »

yes i use reasnow s1

richard · « **Reply #5 on:** April 18, 2021, 11:27:53 AM »

try the three dots button "..." in our anti-recoil macro editor,
just add some to the parameters for the direction when you feel hard to move in that direction.

Ucaio99 · « **Reply #6 on:** April 18, 2021, 09:04:25 PM »

hey Richard which profile do you recommend me to create to play rainbow six siege in classic or updated?

richard · « **Reply #7 on:** April 19, 2021, 10:07:35 AM »

updated one,
and please also change your in-game settings as recommended in our APP.

Ucaio99 · « **Reply #8 on:** April 19, 2021, 06:37:10 PM »

Richard I emailed you there if you have a look there!

richard · « **Reply #9 on:** April 20, 2021, 07:28:09 AM »

sorry, which is your email address that is used to send the emails?

Ucaio99 · « **Reply #10 on:** April 23, 2021, 10:53:57 AM »

Richard, how can you help me, my aim has a time when she skips pixels, what can I do to improve?

richard · « **Reply #11 on:** April 23, 2021, 12:22:59 PM »

We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model, and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
it's better to restore all settings in game and change the settings as shown in our APP, and try it again with a default game config.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version
6. a detailed problem statement on using your mouse

Ucaio99 · « **Reply #12 on:** April 28, 2021, 02:44:29 AM »

Richard what I can do for the r1 seas is more accurate and at the same time more agile in the game I play a lot of rainbow six

richard · « **Reply #13 on:** April 28, 2021, 10:28:09 AM »

1. in-game settings
Options/Controls:
Vertical Sensitivity = 100
Horizontal Sensitivity = 100
Left Stick Deadzone = 10
Right Stick Deadzone = 10
Controller Rotation = Updated
Controller ADS Sensitivity = Standard
Standard ADS Sensitivity = 50

2. mouse
5000DPI/500HZ

3. ReaSnow S1
default config for R6(RainBow Six: Siege(Updated))

Ucaio99 · « **Reply #14 on:** May 05, 2021, 07:33:47 PM »

Richard talks how can I use xim and reasnow s1 together? because I found the sensi better in xim than in reasnow I wanted to know if you have how I use the sensi do xim and macros from reasnow s1 together

richard · « **Reply #15 on:** May 05, 2021, 10:36:56 PM »

please show us the difference between these 2 converters,
we think S1 can do the same if you can provide full details of yours,
a video will be better.

Ucaio99 · « **Reply #16 on:** May 05, 2021, 10:41:28 PM »

it is because it is eating pixel the reasnow I have done everything I put it the way you sent me there anyway eat pixel

Ucaio99 · « **Reply #17 on:** May 05, 2021, 10:43:52 PM »

I wanted to know how to configure the reasnow entirely but I don't know how to configure it because it's in English I wanted to know from basic to advanced

richard · « **Reply #18 on:** May 06, 2021, 11:40:32 AM »

We will need the following details to help you:
1. your console and game
2. mouse DPI/CPI and USB report rate, mouse model, and producer
3. settings in the game on console, such as sensitivity, dead zone, acceleration, aim assist, etc.
it's better to restore all settings in game and change the settings as shown in our APP, and try it again with a default game config.
4. which config has been activated in ReaSnow S1?
your settings for HIP/ADS /HIP YX Ratio/HIP MIN/ADS YX Ratio/ADS MIN/curve in this config
5. ReaSnow S1 firmware and APP version

Ucaio99 · « **Reply #19 on:** May 06, 2021, 07:06:50 PM »

how to use both the way I said?